Industrial valves for isolation, regulation and non-return
Gate, globe and check valves and Y-strainers in every common body material, from ½" utility valves to 24" pipeline valves. Stock items ship fast; anything else we import to your specification.
- Sizes
- ½" – 24" (DN15 – DN600)
- Pressure ratings
- Class 150 – 1500 · PN10 – PN40
- Body materials
- WCB · A105 · CF8 · CF8M · cast iron · brass
- Trim
- 13Cr · SS316 · Stellite-faced
Industrial valves we supply
Gate, globe, check valves and Y-strainers in cast steel, forged steel, stainless, cast iron and brass. Every line is quoted with its standard, material and lead time.
Gate valves
Full-bore isolation with minimal pressure drop when fully open. Not for throttling: a part-open gate vibrates and erodes its seats.
Globe valves
Built for throttling and flow regulation. Higher pressure drop than a gate valve, but precise control and tighter shut-off.
Check valves
Stop reverse flow automatically. Swing checks for low pressure drop, lift checks for small bore, dual-plate wafers to cut water hammer.
Y-strainers
Catch weld slag, scale and debris before they reach pumps, control valves and meters. The cheapest protection on your line.
Cast iron & ductile iron valves
Economical gate, globe and check valves for water, air and low-pressure utility service.
Brass & bronze valves
Threaded valves for water, air and light oils in plumbing, HVAC and small utility lines.
Range at a glance
Need something outside this range? We import to your specification and mark the lead time on the quotation.
- Sizes
- ½" – 24" (DN15 – DN600)
- Pressure ratings
- Class 150 – 1500 · PN10 – PN40
- Body materials
- WCB · A105 · CF8 · CF8M · cast iron · brass
- Trim
- 13Cr · SS316 · Stellite-faced
- End connections
- Flanged RF / RTJ · butt-weld · socket-weld · threaded
- Operation
- Handwheel · gear · pneumatic · electric
- Design standards
- API 600 · API 602 · BS 1873 · BS 1868 · ASME B16.34
- Documents
- Mill test certificates (EN 10204 3.1) on request
Industries we supply
See the service conditions we plan for in each industry.
Oil, gas & refineries
High pressure, high temperature and flammable media, with turnaround deadlines that do not move.
View industry
Power generation
Boiler, feedwater and cooling water circuits run hot and continuously.
View industry
Petrochemicals & fertilizers
Ammonia, urea and acids attack the wrong alloy fast, and constant temperature cycling works against packing and gaskets.
View industry
Manufacturing & utilities
Water, compressed air and steam lines are where unplanned downtime usually starts.
View industryIndustrial valves questions
What is the difference between a gate valve and a globe valve?
A gate valve is for on/off isolation and gives almost no pressure drop when fully open. A globe valve is for throttling and regulation; it costs more pressure drop but controls flow precisely. Use gate valves to isolate and globe valves to regulate.
Which body material should I choose?
Choose by service, not by habit. WCB cast carbon steel suits oil, gas and steam; A105 forged steel suits small-bore high-pressure lines; CF8M stainless suits corrosive and clean service; cast iron and brass suit water and air utilities. Send us your media, pressure and temperature and we will recommend a grade.
Can you supply valves that are not in stock?
Yes. We import to your specification, including specific brands, trims and end connections, and mark the lead time against each line on the quotation.
Do your valves come with test certificates?
Mill test certificates to EN 10204 3.1 are available on request for applicable items. Mention it on your RFQ and we will match certificates to heat numbers before dispatch.
Related products
Ball & butterfly valves
Floating and trunnion ball valves, wafer and lug butterfly valves, actuators and solenoids.
View range
Steel pipes
Seamless and ERW carbon steel, stainless steel and galvanized pipe in SCH 10–160.
View rangeFittings & flanges
Butt-weld and forged fittings, flanges, gaskets and stud bolts in matching class.
View rangeSend your list.
We’ll price every line.
Send an MTO, a spec sheet or a nameplate photo. You get an itemized quotation within 24 hours, with stock and import lead times marked.